/
SDR/BRB Setup Guide

SDR/BRB Setup Guide

Owned by Hannah Kadlec
2023/03/08

  1. Download SDR sharp, probably from this link: https://airspy.com/?ddownload=3130 (windows) (otherwise, google for it)

  2. Inside the install forlder, run install-rtlsdr.bat

  3. Run zadig.exe, which should now be in the install folder

  4. Make sure "Bulk in interface" or similar is selected; install driver

  5. Run sdrsharp.exe, also in the install folder (this is what you'll run every time you use it)

  6. Go to the three lines (top left corner), then source. In the source dropdown about halfway down on the left, select RTL-SDR USB